Milwaukee-tool 6577-20 User Manual download pdf (Page 12)

ACCESSORIES

For a complete listing of accessories refer to your

MILWAUKEE Electric Tool catalog or go on-line

to www.milwaukeetool.com. To obtain a catalog,

contact your local distributor or a service center.

WARNING To reduce the risk of injury,

always unplug the tool before attaching or

removing accessories. Use only specically

recommended accessories. Others may be

hazardous.

Maintaining Tools

Keep your tool in good repair by adopting a regular

maintenance program. Before use, examine the

general condition of your tool. Inspect guards,

switches, tool cord set and extension cord for

damage. Check for loose screws, misalignment,

binding of moving parts, improper mounting, bro-

ken parts and any other condition that may affect

its safe operation. If abnormal noise or vibration

occurs, turn the tool off immediately and have the

problem corrected before further use. Do not use a

damaged tool. Tag damaged tools “DO NOT USE”

until repaired (see “Repairs”).

Under normal conditions, relubrication is not neces-

sary until the motor brushes need to be replaced.

After six months to one year, depending on use,

return your tool to the nearest MILWAUKEE service

facility for the following:

• Lubrication

• Brush inspection and replacement

• Mechanical inspection and cleaning (gears,

spindles, bearings, housing, etc.)

• Electrical inspection (switch, cord, armature, etc.)

• Testing to assure proper mechanical and electri-

cal operation

Maintaining Oil Level

Check oil level before use. To check level, set saw

for maximum depth, rest it at on its shoe and check

oil level window. Oil level should be below max oil

level line on tool (about 1/2 oz.).

If oil level is low:

1. Add oil by setting the saw on its shoe and remov-

ing the oil plug.

2. Pour oil into the chamber. DO NOT OVERFILL.

3. When the proper oil level is reached, replace oil

plug.

MILWAUKEE oil is a synthetic oil specically en-

gineered for worm drive saws. Substitute oils may

cause damage to the tool and be unsatisfactory in

various temperatures. Check oil level frequently

when using tool for extended hours. (Caution: Oil

may be hot.)

WARNING To reduce the risk of injury,

electric shock and damage to the tool, never

immerse your tool in liquid or allow a liquid to

ow inside the tool.

Cleaning

Clean dust and debris from vents. Keep the tool

handles clean, dry and free of oil or grease. Use

only mild soap and a damp cloth to clean your tool

since certain cleaning agents and solvents are

harmful to plastics and other insulated parts. Some

of these include: gasoline, turpentine, lacquer thin-

ner, paint thinner, chlorinated cleaning solvents,

ammonia and household detergents containing

ammonia. Never use ammable or combustible

solvents around tools.

Repairs

If your tool is damaged, return the entire tool to the

nearest service center.

MAINTENANCE

WARNING To reduce the risk of

injury, always unplug your tool before per-

forming any maintenance. Never disas-

semble the tool or try to do any rewiring

on the tool’s electrical system. Contact a

MILWAUKEE service facility for ALL repairs.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 39 40

Comments to this Manuals

No comments

Milwaukee-tool 6577-20 User Manual Page 12

Comments to this Manuals

Related products and manuals for Power saws Milwaukee-tool 6577-20